Jura error codes
Numbered errors on E, ENA, S, J, Z and GIGA machines — the thermoblock, valve, brew-group and grinder codes — plus the messages that will not clear.
All Jura codes
| Code | Meaning | DIY |
|---|---|---|
Error 1 | Coffee thermoblock temperature sensor fault (S/X/J/Z family); damaged sensor on F/E80 | hard |
Error 2 | Coffee temperature sensor interrupted, or the machine is too cold to heat | moderate |
Error 3 | Steam thermoblock temperature too low or its NTC sensor failed | hard |
Error 4 | Steam thermoblock overheating or a defective sensor | hard |
Error 5 | Heating failure: the machine cannot reach temperature | hard |
Error 6 | Electronic ceramic valve not operating correctly | hard |
Error 7 | Ceramic valve / multi-valve or brew-group drive fault (valve did not reach its commanded position) | hard |
Error 8 | Brew group failed to complete its cycle (encoder saw fewer motor revolutions than expected) | moderate |
Fill water tank (tank is full) | Water tank message will not clear although the tank is full | easy |
Empty drip tray (tray is empty) | Tray message will not clear, or "Tray missing" with the tray fitted | easy |
Error 12 | Grinder failed to activate — the motor is seized or the burrs are impeded, most often by a stone picked up with the beans (GIGA: left grinder) | moderate |